<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="http://www.esgroundingsolutions.com/blog/wp-content/plugins/google-sitemap-generator/sitemap.xsl"?><!-- generator="wordpress/3.2.1" -->
<!-- sitemap-generator-url="http://www.arnebrachhold.de" sitemap-generator-version="3.2.5" -->
<!-- generated-on="February 18, 2012 3:05 am" -->
<!-- Debug: Total comment count: 22 -->
<urlset xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.sitemaps.org/schemas/sitemap/0.9 http://www.sitemaps.org/schemas/sitemap/0.9/sitemap.xsd" xmlns="http://www.sitemaps.org/schemas/sitemap/0.9">	<url>
		<loc>http://www.esgroundingsolutions.com/blog/</loc>
		<lastmod>2012-02-18T03:04:26+00:00</lastmod>
		<changefreq>daily</changefreq>
		<priority>1.0</priority>
	</url>
<!-- Debug: Start Postings -->
<!-- Debug: Priority report of postID 761: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/761/our-reading-of-earth-resistivity-is-coming-avarage-2800-ohm-meter-we-are-designing-1133-kv-co-generation-substation-what-are-the-next-steps-required-for-designing-earth-mat-for-70-x-33-meter-area</loc>
		<lastmod>2012-02-18T03:04:26+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 755: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/755/how-do-you-support-a-lightning-protection-down-leads-run-in-a-plenum-ceiling</loc>
		<lastmod>2012-02-16T21:28:02+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 765: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/765/can-insulated-copper-conductor-be-used-for-a-ground-grid</loc>
		<lastmod>2012-02-15T23:51:32+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 758: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/758/how-do-you-convert-soil-resistivity-from-ohm-meters-to-ohm-cm</loc>
		<lastmod>2012-02-14T16:52:01+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 752: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/752/if-a-office-contains-a-load-around-10kw-how-do-you-calculate-how-many-earth-pits-are-needed</loc>
		<lastmod>2012-02-14T16:32:03+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 749: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/749/what-is-accepted-limits-of-gpr-and-gpd-how-do-you-protect-telephone-circuits-from-high-gpr-and-gpd</loc>
		<lastmod>2012-02-14T16:25:09+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 746: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/746/we-are-designing-a-grounding-system-for-a-new-plant-where-the-concrete-encased-electrode-can%e2%80%99t-be-used-anymore-so-we-use-ground-ring-and-rod-to-form-grounding-electrode-system-according-to-ne</loc>
		<lastmod>2012-02-14T16:16:39+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 743: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/743/what-is-meant-by-dsr-tsr-testing-with-a-maximum-30mtr-electrod-spacing-what-should-be-the-depth-of-electrode-at-30-mt-spacing</loc>
		<lastmod>2012-02-14T16:08:00+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 731: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/731/we-have-soil-resistance-in-260-ohm-meter-short-circuit-level-is-8000a-short-circuit-time-3-milli-second-i-want-to-calculate-the-length-of-copper-rod-dia-how-many-earth-pit-required-and-depth-o</loc>
		<lastmod>2012-01-23T18:34:49+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 739: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/739/we-are-in-the-construction-phase-of-building-a-data-center-we-are-gfacing-an-issue-with-the-grounding-inside-the-computer-room-thie-issue-is-basically-is-whether-to-use-spearate-ground-buses-for-pow</loc>
		<lastmod>2012-01-23T18:34:12+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 736: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/736/what-is-the-minimum-size-of-down-conductor-for-lightning-protection-what-is-the-individual-resistance-and-combine-resistance-of-electrode-what-is-the-resistance-of-grounding-network</loc>
		<lastmod>2012-01-23T18:29:11+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 728: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/728/how-can-i-specify-a-deep-grounding-well-for-a-substation-for-example-let%e2%80%99s-say-i-have-a-high-resistivity-soil-that-increases-with-depth-top-layer-6m-of-900-ohm-m-lower-layer-2500-ohm-m-m</loc>
		<lastmod>2012-01-23T18:19:04+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 720: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/720/nec-now-requires-gfci%e2%80%99s-on-refrigerators-is-there-really-a-technical-reason-to-put-a-gfci-on-a-refrigerator</loc>
		<lastmod>2012-01-09T23:25:58+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 717: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/717/i-am-designing-a-ground-ring-for-an-industrial-facility-we-typically-require-the-ground-ring-to-be-5%e2%80%99-from-the-building-but-i-can-not-find-anything-in-the-nec-for-a-building-distance-require</loc>
		<lastmod>2012-01-09T20:35:20+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 714: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/714/is-there-a-minimum-separation-established-between-a-data-center-and-a-115kv-substation-there-is-a-concern-about-the-emi-to-the-servers-routers-etc-the-ground-potential-rise-in-a-data-center-adjace</loc>
		<lastmod>2012-01-09T20:23:56+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 710: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/710/how-do-you-ground-a-building-that-has-been-electrically-isolated-by-means-of-seismic-isolators</loc>
		<lastmod>2012-01-09T20:18:57+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 706: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/706/is-there-a-way-to-determine-the-sphere-of-influence-for-a-ground-plate-like-there-is-for-a-ground-rod</loc>
		<lastmod>2012-01-09T20:09:42+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 703: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/703/i-am-trying-to-run-a-propane-furnace-with-a-3000-watt-generator-during-a-power-outage-the-furnace-is-run-on-a-15-amp-circuit-i-know-that-this-size-generator-will-run-the-furnace-more-often-that-not-2</loc>
		<lastmod>2012-01-09T20:04:29+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 671: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/671/i-have-a-copper-lightning-ground-that-comes-up-and-lands-on-a-copper-bus-plate-on-the-other-end-of-the-plate-is-another-lightning-ground-that-is-connected-and-runs-to-the-roof-can-i-legally-use</loc>
		<lastmod>2011-12-23T00:25:45+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 692: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/692/what-is-the-type-of-earthing-at-shore-side-electrical-equipment-also-please-tell-us-the-standard-followed</loc>
		<lastmod>2011-12-22T20:23:44+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 689: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/689/a-small-data-center-is-being-built-in-a-seismically-active-zone-so-the-building-and-its-outdoor-27kv480v-substation-are-being-built-on-60m-pilings-1-do-all-of-the-pilings-need-to-be-connected-to-t</loc>
		<lastmod>2011-12-22T20:17:14+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 686: Comments: 1 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/686/i-am-trying-to-run-a-propane-furnace-with-a-3000-watt-generator-during-a-power-outage-the-furnace-is-run-on-a-15-amp-circuit-i-know-that-this-size-generator-will-run-the-furnace-more-often-that-not</loc>
		<lastmod>2011-12-22T20:10:24+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 682: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/682/regarding-the-grounding-system-if-we-have-1-or-2-building-feed-from-one-power-source-which-one-is-better-grounding-system-is-to-have-each-building-its-own-grounding-hanholes-or-to-run-separate-groundi</loc>
		<lastmod>2011-12-22T20:03:51+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 678: Comments: 2 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/678/in-substation-often-lv-and-hv-grounds-and-neutral-of-transformer-or-other-instrument-are-connecting-to-one-meshy-network-sometimes-when-lightening-or-other-phenomenona-like-that-occurs-the-lv-instr</loc>
		<lastmod>2011-12-22T19:54:18+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 674: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/674/can-a-20-foot-deep-12-inch-diameter-hole-filled-with-concrete-and-12%e2%80%9d-rebar-in-the-middle-installed-vertically-into-the-earth-be-used-as-a-concrete-encased-electrode</loc>
		<lastmod>2011-12-22T19:48:10+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 668: Comments: 2 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/668/it-is-possible-to-use-the-rain-gutter-as-a-part-of-the-lps-system-in-accordance-with-the-iec-62305-it-is-but-what-is-with-the-nfpa</loc>
		<lastmod>2011-11-22T22:54:26+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 664: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/664/what-are-calculations-regarding-lowering-earth-resistance-using-copper-rods-tapes-at-telecom-tower</loc>
		<lastmod>2011-11-21T17:08:00+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 661: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/661/which-atricle-in-nec-references-swimming-pool-grounding</loc>
		<lastmod>2011-11-21T17:00:37+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 657: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/657/what-about-for-separate-earthing-1-power-electric-and-2-communication-grounding-in-substations</loc>
		<lastmod>2011-11-21T16:51:09+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 654: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/654/we-are-being-instructed-to-use-the-ufer-ground-in-addition-to-the-equipotential-grounding-system-surrounding-the-building-and-attached-to-the-rebar-in-the-foundations-we-are-located-in-jacksonvill-fl</loc>
		<lastmod>2011-11-21T16:46:04+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 651: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/651/we-have-installed-pvc-piping-in-a-poured-wall-to-a-data-port-does-nec-allow-an-additional-bonding-wire-to-be-in-the-conduit-to-bond-the-box-to-the-emt-box-above-ceiling-height</loc>
		<lastmod>2011-11-21T16:40:31+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 648: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/648/how-we-can-ground-the-power-distribution-systems-and-substations</loc>
		<lastmod>2011-11-21T16:33:36+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 644: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/644/to-complete-my-study-at-ptc-polytechnic-college-a-bachelor-degree-in-suriname-south-america-i-am-busy-with-a-case-study-evaluation-of-the-groundingsystem-of-the-telecommunication-main-station</loc>
		<lastmod>2011-11-01T00:46:09+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 641: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/641/we-are-trying-to-put-a-swimming-pool-in-however-new-rules-out-that-we-have-to-have-a-step-and-touch-design-done-why</loc>
		<lastmod>2011-10-21T19:45:43+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 638: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/638/why-separate-the-ground-bar-from-the-neutral-bar-in-a-sub-panel</loc>
		<lastmod>2011-10-20T17:36:38+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 635: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/635/can-grounding-mat-be-monitored-by-scada-so-its-results-produces-notification-by-alarm-an-example-is-gound-wire-is-cut-or-stolen</loc>
		<lastmod>2011-10-20T17:30:03+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 632: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/632/we-are-developing-computer-program-to-analyze-substation-grounding-system-performance-we-have-referred-to-cdegs-as-recommended-by-you-also-we-have-gone-through-etap-ggs-module-and-cymgrd-in-ieee-80</loc>
		<lastmod>2011-10-20T17:23:26+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 626: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/626/we-use-a-gpr-calculator-for-figuring-the-300v-point-however-the-soil-type-input-is-vague-input-of-1-2-or-3-10020-100-and-1001000-ohm-meters-respectively-we-do-not-receive-this-exact-info-fro</loc>
		<lastmod>2011-10-20T17:15:36+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 623: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/623/what-will-be-effect-of-adding-a-ground-rod-or-horizontal-grounding-conductor-on-step-and-touch-voltage-and-especially-on-gpr-at-a-substation-which-option-should-be-considered-as-far-as-design-modific</loc>
		<lastmod>2011-10-13T19:29:40+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 620: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/620/how-can-i-make-a-safe-science-display-to-demonstrate-step-potential</loc>
		<lastmod>2011-10-12T17:43:24+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 616: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/616/i-have-earthing-pits-for-electrical-transformers-located-near-the-earthing-pits-for-my-plcs-what-is-the-safe-distance-between-earthing-pits</loc>
		<lastmod>2011-10-12T17:38:57+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 610: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/610/610</loc>
		<lastmod>2011-10-12T17:33:55+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 606: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/606/i-want-to-know-the-recommended-practice-on-the-interval-period-of-testing-the-conductivity-of-earthing-pole-in-a-lpg-liquidfied-petroleum-gas-filling-plant</loc>
		<lastmod>2011-10-03T18:18:40+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 603: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/603/can-the-earthing-electrode-3-6m-length-of-a-hospitals-mri-unit-be-installed-at-a-distance-less-than-3-6m-from-another-electrode-3-6m-length-which-belongs-to-other-system-installation-in-the-same-b</loc>
		<lastmod>2011-10-03T18:12:00+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 599: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/599/i-have-a-borehole-business-in-fiji-is-it-possible-to-use-soil-resistivity-methods-to-determine-the-presence-of-groundwater</loc>
		<lastmod>2011-09-28T19:28:15+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 589: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/589/is-it-acceptable-to-have-cathotic-protection-cp-impressed-current-on-a-grounding-system-and-how-will-it-impact-instrumentation-grounding</loc>
		<lastmod>2011-09-21T20:44:15+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 585: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/585/we-have-a-product-that-is-made-from-urethane-and-is-used-to-provide-temporary-repairs-of-steel-equipment-the-urethae-has-magnets-cast-inside-and-steel-bars-that-are-cast-in-the-urethane-and-extend-ou</loc>
		<lastmod>2011-09-16T20:19:06+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 581: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/581/is-it-possible-to-determine-the-electrical-conductivity-of-soil-using-a-ph-meter</loc>
		<lastmod>2011-09-09T06:22:46+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 573: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/573/im-designing-a-high-rise-building-in-inda-with-116-floors-with-4-substations-what-are-the-methodsstandards-for-grounding-high-rise-buildings</loc>
		<lastmod>2011-09-02T22:42:27+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 516: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/516/do-i-need-down-conductors-to-be-bonded-to-the-re-bar-in-concrete-column</loc>
		<lastmod>2011-09-01T01:26:16+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 527: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/527/seaworld-lightning-strike-injures-8-people-at-water-park-in-orlando-florida</loc>
		<lastmod>2011-09-01T01:11:03+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 536: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/536/alice-svensson-swedish-girl-struck-by-lightning-twice-in-shower</loc>
		<lastmod>2011-09-01T01:06:23+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 452: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/452/452</loc>
		<lastmod>2011-08-31T00:57:12+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 558: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/558/we-are-in-process-of-doing-earthing-calculation-for-a-small-project-with-11-415kv-distribution-we-have-modelled-the-system-in-etap-output-has-come-in-that-there-is-mention-in-the-report-of-etap-tha</loc>
		<lastmod>2011-08-30T17:09:40+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 551: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/551/ontario-storm-lightning-vs-the-cn-tower-video-2</loc>
		<lastmod>2011-08-25T18:44:36+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 544: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/544/what-is-the-electrical-code-or-regulation-for-grounding-a-disconnected-hv-motor-just-for-reference-purposes</loc>
		<lastmod>2011-08-25T17:42:32+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 540: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/540/the-ground-fault-interrupter-shuts-off-the-power-to-my-garage-i-measured-the-resistance-between-hot-and-neutral-and-it-was-about-15-ohms-is-there-a-short-circuit</loc>
		<lastmod>2011-08-25T17:35:27+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 530: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/530/osha-issues-121100-00-in-fines-for-grounding-violations</loc>
		<lastmod>2011-08-19T18:50:18+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 524: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/524/what-is-required-to-properly-ground-a-190-guided-tower-currently-no-proper-ground-exists-only-an-8-rod-next-to-tower</loc>
		<lastmod>2011-08-18T17:47:55+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 519: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/519/is-there-a-minimum-distance-for-the-down-grounding-conductor-in-a-lighting-protection-system-in-regards-with-flammable-piping-natural-gas-lpg-gas</loc>
		<lastmod>2011-08-16T18:50:51+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 513: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/513/i-have-an-attendance-system-in-a-factory-when-the-equipment-is-properly-ground-thru-its-chassis-is-there-a-voltage-between-the-chassis-and-earth-ground-when-an-equipment-is-properly-ground</loc>
		<lastmod>2011-08-12T18:19:17+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 510: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/510/how-many-%e2%80%9dhot%e2%80%9d-wires-can-a-single-neutral-support-assuming-they-are-the-same-gauge-wire</loc>
		<lastmod>2011-08-11T18:10:54+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 477: Comments: 1 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/477/what-is-step-potential-and-why-is-it-important-to-tie-all-systems-together</loc>
		<lastmod>2011-08-10T23:48:36+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 505: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/505/does-nigeria-have-an-earthing-standards-like-other-countries-do</loc>
		<lastmod>2011-08-10T15:49:34+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 500: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/500/japanese-code-for-lightning-protection-has-followed-iec-61024-1-iec-62305-3-superseded-it-the-basic-consideration-is-equipotential-reduce-the-differences-of-potential-does-this-meet-minimum-nfp</loc>
		<lastmod>2011-08-08T18:36:53+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 496: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/496/when-using-an-%e2%80%9delectrical-safety-analyser%e2%80%9d-that-displays-mohm-on-the-ground-lead-from-plug-to-device-chassis-fluke-180-or-equiv-what-is-the-underlying-technical-reason-for-measurin</loc>
		<lastmod>2011-08-01T22:09:36+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 493: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/493/can-we-conduct-the-electrical-resistivity-test-in-monsoon-as-it-affect-the-results-of-resistance-and-what-will-be-the-impact-on-design-of-electrical-system-for-power-plant</loc>
		<lastmod>2011-07-31T17:53:38+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 473: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/473/im-in-new-zealand-is-the-reinforcing-mesh-in-a-concrete-slab-building-foundation-require-to-be-earthed</loc>
		<lastmod>2011-07-30T01:04:26+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 481: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/481/we-are-having-problems-in-our-tank-farm-finding-that-tanks-has-a-grounding-grid-around-them-but-they-are-not-tied-together-is-there-a-problem-with-step-potential-when-the-systems-are-not-tied-togeth</loc>
		<lastmod>2011-07-29T17:55:41+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 484: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/484/how-can-i-measure-earth-resistance-of-electrical-panel-which-is-earthed-through-gi-flat-which-is-connected-to-mother-earth</loc>
		<lastmod>2011-07-29T17:54:53+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 468: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/468/we-have-a-640kva-generator-in-an-iron-mining-area-which-is-the-best-method-to-earthground-the-generator-putting-in-consideration-that-the-ground-is-highly-conductive-with-iron</loc>
		<lastmod>2011-07-15T18:01:32+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 465: Comments: 1 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/465/how-do-you-calculate-no-of-earthing-pits-for-a-particular-area-in-india</loc>
		<lastmod>2011-07-15T16:40:43+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 462: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/462/we-have-cat-5-running-up-the-towers-to-radios-at-the-top-we-are-currently-looking-for-the-best-way-to-ground-the-cat-5-cables</loc>
		<lastmod>2011-07-15T16:32:03+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 407: Comments: 1 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/407/i-am-designing-a-ground-grid-for-a-new-115kv-substation-the-civil-design-is-planning-on-utilizing-steel-piles-for-strucutral-support-we-would-like-to-utilize-the-piles-as-ground-rods-if-possible-bu</loc>
		<lastmod>2011-07-15T02:45:13+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 456: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/456/i-work-for-the-cross-river-state-governmentin-nigeria-do-you-offer-field-engineer-training</loc>
		<lastmod>2011-07-14T20:44:40+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 422: Comments: 2 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/422/when-disconnecting-an-11000-volt-elecrtrical-motor-should-the-hv-supply-cable-be-earthed-or-not-at-the-substation-when-the-hv-vcb-is-racked-to-the-isolated-position-i-have-concerns-if-a-hv-fault</loc>
		<lastmod>2011-07-14T20:12:17+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 427: Comments: 1 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/427/ppl-underground-service-do-i-have-to-ground-the-meter-base-or-do-they-if-so-how</loc>
		<lastmod>2011-07-14T20:11:42+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 433: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/433/bought-a-40x24-metal-frame-with-metal-sidings-building-no-elec-or-plumb-at-present-maybe-later-inspector-requires-grounding-metal-building-1%c3%9758%e2%80%9dx8%e2%80%99cu-clad-steel-rod-ok-tied-t</loc>
		<lastmod>2011-07-14T20:11:17+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 436: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/436/we-excuting-220kv-switchyard-in-gujrat-india-i-have-required-testmeasurment-method-for-step-and-touch-voltage-plz-given-me-a-method</loc>
		<lastmod>2011-07-14T20:10:52+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 439: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/439/what-is-the-the-advantage-of-isolating-power-supplies-return-from-the-unit-and-ground-the-signal-shields-at-the-unit-enclosure-ground</loc>
		<lastmod>2011-07-14T20:10:16+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 442: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/442/we-have-auluminum-al-cabinets-that-we-have-applied-a-black-anodized-coating-to-is-that-sufficient-to-avoid-static-shock-and-will-it-then-not-need-to-have-ground-studs-installed-since-it-is-black-a</loc>
		<lastmod>2011-07-14T20:09:26+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 417: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/417/it-is-a-common-practice-to-measure-grounding-only-in-ac-here-in-brazil-ive-told-since-i-was-at-university-that-dc-currents-cannot-be-used-to-measure-grounding-because-of-the-ionic-recombination</loc>
		<lastmod>2011-07-08T18:25:11+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 412: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/412/i-am-working-in-power-distribution-utility-in-jharkhand-india-the-place-where-i-am-working-fault-in-overheadline-because-of-bird-is-common-please-advise-me-how-to-over-come-this-bird-fault</loc>
		<lastmod>2011-07-08T15:57:21+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 404: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/404/is-there-any-standards-related-to-grounding-measurements-of-energized-substations-on-oil-plants</loc>
		<lastmod>2011-07-07T20:16:22+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 400: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/400/please-advise-the-best-method-to-protect-3311kv-powersubstation-from-lighting</loc>
		<lastmod>2011-07-06T16:15:49+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 395: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/395/is-it-possible-to-consider-using-the-telecom-tower-itself-as-a-conductive-metal-part-down-converter-and-ignore-using-popular-down-converter-and-still-have-a-reliable-protection-against-lightning</loc>
		<lastmod>2011-07-06T02:09:28+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 391: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/391/i-would-like-to-know-when-is-it-necessary-to-put-a-disconnect-switch-in-a-residence-with-a-100-200-amps-and-where-do-you-ground-it-to-a-rod-water-pipes-or-just-to-the-panel</loc>
		<lastmod>2011-07-05T21:32:56+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 383: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/383/how-does-one-become-grounding-and-bonding-certified</loc>
		<lastmod>2011-07-01T23:43:15+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 309: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/309/the-nec-calls-for-use-of-ground-fault-protection-gfp-type-for-circut-breakers-for-services-over-1000a-does-this-include-buildings-or-just-equipment</loc>
		<lastmod>2011-07-01T14:30:54+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 375: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/375/lightning-kills-22-students-1-teacher-in-uganda</loc>
		<lastmod>2011-06-30T15:20:58+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 371: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/371/i-am-going-to-place-two-grounding-rods-what-is-the-distance-required-by-the-nec-away-from-the-electrical-panel-and-what-is-the-distance-they-should-be-from-each-other-the-rods</loc>
		<lastmod>2011-06-30T04:02:20+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 368: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/368/is-using-cdegs-for-design-of-the-substation-earthing-system-economically-more-beneficial-compared-to-using-ieee80-formulas-i-mean-can-i-reduce-the-used-copper-and-justify-it-or-not</loc>
		<lastmod>2011-06-30T03:55:37+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 298: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/298/is-it-possible-to-meaasure-the-soil-resistivity-in-abnormal-rocky-terrain-in-india-with-the-method-of-induction-of-magnetic-field-rather-than-the-conventional-wenner-4-pin-method</loc>
		<lastmod>2011-06-30T03:47:32+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 360: Comments: 2 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/360/on-board-a-cargo-ship-our-ups-has-an-earth-indicator-that-is-on-and-we-have-been-looking-where-the-problem-is-those-lines-related-to-these-circuits-are-mostly-sensors-and-hydraulic-valves-and-actuat</loc>
		<lastmod>2011-06-30T03:45:46+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 357: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/357/the-administrative-and-physical-control-of-the-access-to-electrical-disconnects-fuses-circuit-breakers-interlocks-switches-control-systems-energy-storage-components-and-other-hazard-has-the-abbrevi</loc>
		<lastmod>2011-06-30T03:31:37+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 354: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/354/we-are-doing-many-grounding-point-in-semole-area-in-southeast-asia-we-need-to-keep-space-between-the-two-grounding-points-how-much-distance-is-required</loc>
		<lastmod>2011-06-30T03:25:35+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 351: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/351/i-have-this-great-new-product-that-is-nearly-as-conductive-as-copper-can-i-simply-add-a-few-conductors-and-use-it-on-my-substation-ground-grid</loc>
		<lastmod>2011-06-30T03:18:20+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/disclaimer-of-liability</loc>
		<lastmod>2011-06-28T21:33:04+00:00</lastmod>
		<changefreq>weekly</changefreq>
		<priority>0.6</priority>
	</url>
<!-- Debug: Priority report of postID 341: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/341/in-a-given-substation-ground-grid-design-using-copper-cable-if-you-substitute-different-cable-materials-such-as-copper-cald-steel-cable-and-the-grid-resistance-increases-can-you-just-change-the-numb</loc>
		<lastmod>2011-06-28T19:59:35+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 319: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/319/what-are-the-effects-of-lightning-on-a-grounding-system</loc>
		<lastmod>2011-06-24T20:56:01+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 337: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/337/is-it-possible-to-provide-electrical-grounding-utilzing-planned-structural-deep-earth-shafts</loc>
		<lastmod>2011-06-24T19:00:18+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 328: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/328/why-am-i-reading-23-volts-on-the-ground-wire-with-one-lead-on-the-ground-wire-the-other-in-the-earth</loc>
		<lastmod>2011-06-21T19:32:38+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 322: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/322/im-installing-an-earth-matt-for-a-88kv-substation-what-is-the-required-resistance-between-the-earth-matt-and-the-general-mass-of-the-earth</loc>
		<lastmod>2011-06-20T23:34:16+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 325: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/325/should-the-earthing-system-of-plc-or-communication-rooms-in-high-voltage-transmission-substations-be-electrically-seperated-from-other-parts-of-the-substation-please-reference-the-standards</loc>
		<lastmod>2011-06-20T17:51:17+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 316: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/316/how-do-you-ground-a-substation-on-the-15th-floor-of-a-high-rise-building</loc>
		<lastmod>2011-06-16T18:55:51+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 312: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/312/how-do-you-meet-a-grounding-system-requirement-for-0-5-ohm-earth-resistance-in-thailand</loc>
		<lastmod>2011-06-16T18:43:44+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 304: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/304/by-u-s-code-can-i-insert-a-device-in-the-path-of-the-protective-earth-ground-conductor</loc>
		<lastmod>2011-06-08T01:20:36+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 290: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/290/is-it-safe-to-use-structural-steel-as-a-down-conductor-for-a-lightning-protection-system-at-a-school</loc>
		<lastmod>2011-05-26T02:23:46+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 287: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/287/why-do-you-have-to-bond-the-neutral-and-the-ground-wire-in-the-main-panel</loc>
		<lastmod>2011-05-23T17:28:34+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 282: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/282/how-can-i-measure-the-earth-resistance-of-a-telecommunication-site-with-an-antenna-tower-beside-it</loc>
		<lastmod>2011-05-16T21:16:49+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 272: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/272/for-a-data-center-how-can-you-properly-ground-low-voltage-and-medium-voltage-systems-in-the-same-room</loc>
		<lastmod>2011-05-10T17:57:41+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 266: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/266/i-have-several-buildings-feed-by-same-power-source-can-we-connect-all-buildings-to-the-same-ground-conductor-or-we-need-to-run-separate-conductor-for-each-building-and-go-to-one-grounding-system-eart</loc>
		<lastmod>2011-05-07T20:21:10+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 261: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/261/high-dollar-log-house-ranch-highest-point-around-with-little-or-no-trees-in-immediate-area-is-this-a-lightning-hazard</loc>
		<lastmod>2011-05-07T20:17:56+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 243: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/243/does-a-lightning-protection-system-need-to-be-re-certified-for-simply-replacing-the-edge-coping-of-a-building</loc>
		<lastmod>2011-04-29T17:21:27+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 251: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/251/do-you-have-to-use-a-locknut-on-the-conduit-penetrating-the-fixture-what-is-the-purpose-for-the-locknut-is-it-an-nec-requirement</loc>
		<lastmod>2011-04-22T15:51:02+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 255: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/255/can-a-faraday-cage-and-ground-system-be-developed-for-a-hospital-mri-system-experiencing-electrical-interference</loc>
		<lastmod>2011-04-22T15:50:30+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 17: Comments: 3 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/17/what-is-proper-grounding-for-a-hazardous-goods-storage-area</loc>
		<lastmod>2011-04-12T17:17:40+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 239: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/239/how-do-you-calculate-ground-electrodes-in-an-earth-pit-what-is-the-recommended-weight-calculation-for-step-50kg-or-70kg</loc>
		<lastmod>2011-04-11T23:18:11+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 230: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/230/can-the-lightning-protection-system-componets-be-painted-and-still-be-recertified</loc>
		<lastmod>2011-04-07T21:16:13+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 223: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/223/what-grounding-standards-are-there-for-the-installation-of-high-tech-equipment-particularly-audio-visual-gear</loc>
		<lastmod>2011-03-21T22:22:04+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 80: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/80/how-do-you-provide-reversible-and-accessible-ground-rod-connections</loc>
		<lastmod>2011-03-18T20:34:26+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 180: Comments: 2 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/180/how-do-you-properly-ground-a-portable-electric-generator-genset</loc>
		<lastmod>2011-03-18T20:33:33+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 24: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/24/can-electrical-nonmetallic-tubing-ent-conduit-and-fittings-be-used-in-metal-boxes-if-grounded</loc>
		<lastmod>2011-03-18T20:28:32+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 33: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/33/how-can-i-reduce-the-grid-ground-potential-rise-without-increasing-the-physical-area-of-my-site</loc>
		<lastmod>2011-03-18T20:17:38+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 4: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/4/what-is-ground-potential-rise</loc>
		<lastmod>2011-03-18T20:14:46+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 167: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/167/how-is-sphere-of-influence-calculated-for-a-horizontally-run-grounding-system-such-as-a-ground-ring-or-concrete-encased-conductor</loc>
		<lastmod>2011-03-10T17:11:15+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 174: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/174/how-do-you-protect-a-steel-pipe-electrode-from-unwanted-stray-currents</loc>
		<lastmod>2011-03-10T17:10:52+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 177: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/177/are-there-specific-requirements-to-conduct-maintenance-on-various-equipment-grounds-and-building-ground-grids</loc>
		<lastmod>2011-03-10T17:10:35+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 196: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/196/the-hydra-tower-harnesses-lightning-for-energy</loc>
		<lastmod>2011-03-10T17:09:54+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 8: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/8/what-standards-should-be-applied-for-labeling-grounding-requirements-on-medical-devices</loc>
		<lastmod>2011-03-08T18:21:23+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 76: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/76/can-corrosion-protection-anodes-cause-high-resistance-grounding</loc>
		<lastmod>2011-03-02T02:49:42+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 98: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/98/how-do-you-properly-size-the-transient-voltage-surge-suppression-tvss-for-lighting-strike-potential</loc>
		<lastmod>2011-03-02T02:47:23+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 146: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/146/what-are-the-standards-for-communication-equipment-grounding-and-how-do-you-prepare-preventive-and-corrective-maintenance-check-lists</loc>
		<lastmod>2011-03-02T02:26:14+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 15: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/15/what-is-the-best-way-to-protect-my-house-from-a-lightning-strike</loc>
		<lastmod>2011-01-30T20:09:00+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 29: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/29/in-a-correctly-grounded-system-should-i-expect-circuit-current-on-the-equipment-ground-conductor-egc</loc>
		<lastmod>2011-01-30T20:08:35+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 21: Comments: 1 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/21/is-there-a-way-to-store-and-utilize-the-energy-produced-from-lightning</loc>
		<lastmod>2011-01-30T20:07:38+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 38: Comments: 2 of 22 = 0.1 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/38/thunderstorms-proven-to-create-antimatter</loc>
		<lastmod>2011-01-30T20:06:03+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: Priority report of postID 90: Comments: 0 of 22 = 0 points -->
	<url>
		<loc>http://www.esgroundingsolutions.com/blog/90/90</loc>
		<lastmod>2011-01-27T20:07:27+00:00</lastmod>
		<changefreq>monthly</changefreq>
		<priority>0.2</priority>
	</url>
<!-- Debug: End Postings -->
<!-- Debug: Start Custom Pages -->
<!-- Debug: End Custom Pages -->
<!-- Debug: Start additional URLs -->
<!-- Debug: End additional URLs -->
</urlset>
